TRG_Catalog_2017-flipPrep

6

Have you Evolved? The TRG Evolution System Simplifies your life!

Gaskets

• Easily installed retrofit retainer and gasket that replaces screw-on gaskets with snap-in gaskets. • The gasket retainer creates the thermal break. • With the Evolution System installed, future gasket installations require no tools. • External gasket bellows are less vulnerable to abuse and easier to clean.

Install TRG Evolution System in two simple steps:

The Evolution System includes: • Pre-drilled, cut-to-length gasket retainer • Snap-in gasket • Stainless steel phillips screws Installing Evolution System is easy! All you need is: • Drill • 1/8" drill bit (TRG Item: 99-T190-AG) • Phillips screwdriver bit for your drill • TRG’s Totally Radical GOO (or food grade silicone) To order: Measure the inside plate of the door or drawer.This can be done by lifting the screw-on gasket from the inside.You do not have to remove the gasket. For more information please contact us.

Gasket Retainer

#1: Screw in the retainer

Snap-in Gasket

#2: Snap in the gasket