TRG_Catalog_2017-flipPrep

15

D art G askets

Gaskets

20-10-029 Gray

20-10-060 Gray

9/16"

9/16"

5/8"

7/16"

9/16"

1"

15/16"

Measure here

Measure here

Outside Dimensions

Outside Dimensions

Does your gasket look like this? Here’s a Tip! Make sure your magnet is in the right place. During handling and shipping, the magnet can drop down out of the corner. Follow these simple instructions to correct the issue.

1. Lay the gasket on a flat surface.While holding pressure on the magnet (left hand), lift the corner (right hand) curling the gasket toward itself. 2. Place your thumb firmly on the magnet (right hand) while releasing the other hand (left hand). 3. Keeping continued firm pressure on the thumb, and no pressure on the magnet with the other hand, bend the gasket away from itself pulling the magnet into the corner. Repeat as needed.





